Description

Door Gap Gauge to Check Fire Door Assembly Clearance Requirements!!!

• The Fire Door Gap Gauge is an Easy to Use, Pocket-Sized Tool that fits on almost any keychain that way you have it when you need it.  It also doubles as a beer bottle opener and a 3” tape measure.
• Designed specifically to check clearance requirements before inspections for Fire Rated Door Assembly’s by your AHJ.
• The gap gauge tool was designed with input from many AHJ’s, Fire Marshall’s tradesmen, and inspectors.
• It is Easy to Read
• Light Enough to Carry Everywhere
• Machined out of aluminum to very tight tolerances.
• The cool thing about DGG is that it is a multi-use tool that brings convenience for many.  Are you an Inspector, Quality Control, Tradesperson, or Architect that needs to measure that item on the 19th floor? Well, you are in luck if you have the Fire Door Gap Gauge.  That same day you are finishing up work. The crew decides to meet at the park and have a couple of Beers.  You pull out your DGG and are rescued yet again.  It is not only designed to help save lives but will rescue you when you least expect it.
• Check out our blog about the Best Door Gap Gauge by visiting our blog!
• Check out our NFPA 80 Fire Door Inspection Checklist Here!

Door Gap Gauge Specifications

• It is compact and easy to use with its machined steps to identify the following margins 1/8″, 3/8″, 1/4″, 3/8″, 1/2″ 5/8″, and 3/4″ for your required door gaps.
• It also has a material thickness gauge with the ability to measure the following sizes 20ga, 16ga, 15ga, 14ga, 1/8″, 10ga, 3/16″, and 1/4″ of sheet goods and wire sizes.
• The coolest part is that it boasts a beer bottle opener and attaches to your keychain when you need it the most.

Watch the introduction video to the fire door gap gauge below.